What’s up, Insiders! I’m your male, DeucesJack. Today, we’re going to be discussing the ThunderHead Creations Tauren X pod system. Check out that gold emblem on there. I’m type of digging it. Now, before we decrease low, let me inform you right off the jump. This is an extremely versatile open pod system. You have the option of getting it with an RBA area, or a factory coil section. I don’t understand if they’re both going to be available in the package. I know I got offered the RBA area individually but I’m going to discuss both of them just for you. ThunderHead Creations Tauren X Pod System Kit
Prior to we enter the video, make sure you have a look at our new merch website. You can get my tagline on a hoodie or a t-shirt.
FROM TOP BOTTOM
Now, let’s go over the factory coil part of it initially due to the fact that I believe that’s what a lot of individuals are going to be interested in. It’s got a 510 feel but you see how it’s got that larger o-ring on top? I do not understand why they didn’t go with a regular 510 drip pointer.
That is your base that’s going to hold your coil. You screw your coil into that. It’s a little stiff right now however once you get some juice on it you ought to be alright.
Here is your 0.6 ohm mesh, good for 15-23W. You can see inside there, you can see the mesh. This is the coil we’re going to be juicing up in a second.
Now here’s something fascinating. This yellow coil with the yellow o-rings, this is your 1ohm mesh, excellent for 9-14W. I’m kind of diggin that.
The juice we’re going to be utilizing today considering that it is fall, we’re going to be using Freeman’s Fall Spirit. Nothing crazy, don’t go nuts. We’re going to put this on deck for a second.ThunderHead Creations Tauren X Pod System Package
Let’s review the mod and then we’ll review the RBA base. One nice little touch before we discuss the mod, they offer you an extra base. You will have to use the airflow control ring, your old one, but it’s nice that they include an additional one. And you have some spare o-rings as well.ThunderHead Creations Tauren X Pod System Package
Let’s go over the mod. I have the RBA deck installed that I’m going to show you in a minute. The one that utilizes the factory coils is clear, good.
Here, this little hole right here, that’s where you’re going to get your airflow from. See the RBA base right there? Rather, your adjustable air flow is right here on your RBA base.
There’s the bottom of your base, your two gold-plated contacts that in fact reach the mod. Inside the mod, you can see, your 2 gold-plated contacts and your 2 magnets in each corner. Really, very strong magnets, I like it. Now here’s something intriguing. It kind of has a little bit of motion when you use the factory pod. It doesn’t suit there as tight. It does not actually move while you’re vaping however that’s method too loose, as far as I’m concerned. I don’t like that at all. Another thing is you’re going to need to make certain you line up the air flow so it beings in front of that air flow hole. See that? You wish to make certain you turn the base enough so it beings in front of that. You do not want it not sitting in front of that air flow hole. Otherwise, it’ll be blocked. That movement is unacceptable, as far as I’m concerned. Conversely, when you put the RBA deck therein, it does not move at all, it really does not. It’s in there a lot tighter. I do not know why they could not make it so it fits the same way. I’m thinking the metal base is having an extensive impact on making this tighter than this one. The only distinction between the two is this one does not have that metal base on the bottom.
We’re going to go over the RBA area part now. In other words, there’s a shaft, a screw and a spring that goes inside that you have to put together. If you’re going to launch this you got to assemble this fully because it was a pain in the neck to put together that part.
When you want to assemble your RBA base, develop your coil and wick it, the very first thing you need is this. It’s simply press fit in there simply like that. When you have that, the chimney section just loosens like so.
I’m not going to go over how to construct it. And now what we’re going to do is we’re going to take a little piece of cotton. That’s your wicking port, that’s where your cotton is going to get fed to juice so you actually don’t want to go bigger than this coil and at the sink due to the fact that you’re just not going to have sufficient volume of juice getting through there to feed a larger wick.
Now that you got that all cut, what you want to do is you want to take your wick and you just desire to kind of carefully fold it around and tuck it in there. See that right there, how I’m blocking that hole with the cotton. That’s how you want it so now what you wish to do is you wish to do the same thing on the other side, simply carefully tuck it in there and now you can see, I’m blocking that wicking port there which’s where your juice is going to feed from.
The juice I’m going to try today is Blnd ‘d. You desire to get that coil streaming. Go sluggish due to the fact that it’s a little tank.
WHAT remains in THE BOX
1 x Tauren-X-Pod
1 x RBA Coil
1 x Construct deck
1 x USB Cable television
1 x Lanyard
1 x User Manual & Warranty Card
1 x Spare Parts
Fit Together Coil Variation
1 x Tauren-X-Pod
1 x USB Cable
1 x Lanyard
1 x 0.6 Ohm Mesh Coil
1 x 1.0 Ohm Mesh Coil
1 x User Handbook & Service Warranty Card
1 x Spare Components
Alright, Insiders! Let’s review those cons and pros.
Very first con is going to be, individuals are going to point it out in the comments. I truly don’t care, but individuals are going to say it appears like a Vandy Vape Mutant. It does. It appears like it took style lines from the Mutant by Vandy Vape. I got to point it out. It’s a con because it’s going to be mentioned in the comments, I understand.
I seem to get a lot of condensation no matter what air holes I choose. There just constantly appears to be juice hanging around that general location. It’s just always there.
Post holes on this one, they could have certainly been bigger. They had the space, they should have made them bigger. Not like you can’t get a good sized coil in there but I would have liked to have seen them bang those post holes out a bit. It’s a bit of a con.
And the last con’s going to be that squonk post that you have to install yourself after you put the squonking pin in. That’s a real annoyance to set up. You sort of got to like slip your fingers in there and get it in there simply to get it to capture the threading. It’s irritating as hell, it really is. It’s a con for me. I don’t have fragile little fingers. I had a bumpy ride with it, I’m not going to lie.
But that’s it on the cons. Nothing that’s a deal-breaker. Let’s proceed to the pros due to the fact that we do have some pros on this one.
The first pro’s going to be, it’s got adjustable wattage. I gave that as a pro on my Oukitel Bison Review too. I always like that on these AIO pod system type of sets. Nice task, THC.
I simulate the reality that they came up with a factory coil setup or an RBA setup. Incredible job, pro.ThunderHead Creations Tauren X Pod System Set
This one’s easy to use.
It’s developed truly well.
Got a great paint job.
Smooth draw. I have actually been enjoying the make use of this thing.
You saw it down low, it’s simple to develop and wick.
I’m getting excellent taste with the RBA. I got the 0.6-ohm coil in here. I got it at the 25W maximum. Let me reveal you what I’m working with here. Okay. I’m getting the completely saturated flavor.
I’m getting some great heat off of this. It’s a heat that you typically do not leave a pod AIO system this little. I’m absolutely digging it.
It’s an actually gratifying vape. This is among those sets that I might actually change my 18650 establish with a sub-ohm tank. I could rock this throughout the day and be satisfied. That’s a big pro.
This thing works well with 3 bass or nic salt juices, that’s a pro.
I believe it’s an attractive package.
It’s got that simple top fill.
And it’s got a good capability.
So that’s it, Insiders! Those are my cons and pros. Let’s chat about this one a bit.
It’s just a great pod/AIO package. Most likely one of the best pods/AIO systems on the market right now. Some of them are simply extraordinary.
Let’s discuss some of the specs on the Thunderhead Creations Tauren X pod system. It determines in at 97mm x 40mm x 20mm. It has a 25W maximum. It includes a 0.2 inch LED display. It has a 1,000 mAh battery. It charges internally at 1amp. It will fire down to 0.3 ohms. It has a 2ml capacity. 2 pod variations are available. You can get the factory coil version or the RBA section variation factory coil. It includes a 0.6 ohm coil that’s mesh, and it likewise includes a 100 mesh coil. The RBA variation comes with an RBA deck and an adapter that allows you to fire the coil. ThunderHead Creations Tauren X Pod System Set
Measurements: 97x40x20( mm).
Product: Aluminium Alloy/PCTG.
Gross Weight: 205g( Mesh.
Variation)/ 223g( RBA Version).
Power Range:5 -25 w.
Charging Existing: 1A.
Resistance: 0.3– 3.0 Ω.
Port: Micro USB.
Fill Type: Leading Fill.
Coil Type: RBA; Mesh Coil 1.0 Ω( MTL)/ 0.6 Ω( DTL).
I know I got offered the RBA section separately however I’m going to go over both of them simply for you.ThunderHead Creations Tauren X Vape Pod System Set
Now, let’s go over the factory coil part of it initially due to the fact that I believe that’s what a lot of individuals are going to be interested in. Let’s go over the mod and then we’ll go over the RBA base. We’re going to go over the RBA area part now. That’s your wicking port, that’s where your cotton is going to get fed to juice so you truly don’t want to go larger than this coil and at the sink since you’re just not going to have sufficient volume of juice getting through there to feed a bigger wick.