relx devic vape and artisan herbva pro nokiva vaper review

Today I took a look at the latest series herbva pro sent for review by Sourcemore. PAL popular series in 2019 thanks in part to its design “tocho box baby,” I have both the original PAL and PAL II Pro, so I’m happy to see if version 18650, which is more like a box of tickets will put a decent level.

 

The herbva nokiva

equipped with the outdoor shows a sleeve device in the selected color on the front, and a table of contents, and the identification code on the back. Currently, only two colors: “nest of black bee” which is what I have here, and “curse of the rainbow” (red). Inside, you will find a box with only arteries fairly simple logo, the fingers broken cover to facilitate access and instruction booklets reveals elevator, where the rest of the kit is is arranged in a layer.

 

The device itself is protected on the sleeves and the plastic panels also have a protective screen cover their models to better protect the finish during transport. A USB-c cable and the second coil with basic afc in a small bag with a variety of spare parts O-ring.

 

specification:

 

Size 89 mm x 45 mm x 23.5 mm

Mag construction

PCTG tank 3 ml (2 ml for TPD)

18650 single

Amp load via USB 1.5-c

output 5 to 60 watts

Resistance is between 0.3 and 2.0 ohms

 

PAL18650 may seem a little more like PAL PAL II Pro as the original and surprisingly, not much more than the displacement of internal 1000mAh removable battery is 18650. This is still pretty soft, and aluminum alloy and construction support polycarbonate.

 

If you wonder why some odd angles in the pictures, if the side panels are finished in mirror, so that can be used almost like a shaving mirror! catch them in the right light and if you really pop. Unfortunately, not much movement in the two panels forming a disturbing rattling noise, so if you are the type that was stirred with these things that could push on the wall in a short period of time. The high gloss finish also has a bit of a fingerprint magnet.

 

Under the side panel is Tray button battery with the spring pin on top, a sign of the battery could certainly made more evident here, but there are at the least one band to aid in removing the battery. On the opposite side is the vehicle itself with tiny buttons of the screen and up / down. The appearance of the screen is exactly the same as that found in the PAL II Pro if you are a little older like me a drink, then reading is a necessity here, I am happy to report that the noise disturbing PWM Pro is not as visible today, but it seems all the new card, insert a battery also means that 18650 is now capable of delivering 60 watts are also adjusted from 5 to 60 watts in stages 0 5 watts.

Insert and remove the pods may be easier, unlike similar systems in which to place the capsule at first base in the corner here, you should have lined up around the square, which makes me a little worried about the prospects its power pin in the long term, this slightly reduced with chamfered edges on the basis of the air flowing through the same.

 

edge devices is sufficient vacuum outside the airflow and a USB-c a side port and the tip 510 is compatible with drops on top. There is a USB port LED backlight to display the approximate battery capacity, but it was so small, barely noticeable, if the use 0.96amps PAL18650 carries cargo on board with all that is cool and pleasant needed. I’m happy to go with the standard of the airistech 510 because I find advanced drip includes just a bit too short to be practical. I think this kit style is also very useful for both the right or left hand so he could be perfect for everyone out there and handed the power button is perfectly positioned in each hand.

 

The nacelle itself uses a standard platform / coil / afc assembly, but here the threaded base afc nacelle designs of stimulation fit. JTMPs meaning of construction must be resistant to most liquids and has a capacity of 3 ml (2 ml for PDT area). port low low enough padding on a boat that seems counterintuitive, but the full show arteries flat device lies that works very well in practice and media key hole design that do not suffer disruption air pockets during filling good.

 

PAL18650 IP support rollers, first seen in arteries and AIO coils to the previous version of the HP PAL airistech. different sizes of coils and two different rooms AFC provided in the box. This package includes an IP mesh coil 0.4ohm artisan vaper direct lungs is limited, and round wire coil HP lungs mouth experience. Several other HP coils provided so that if you have a favorite from earlier versions also work here more a part RBA is also available as a separate purchase.

 

I do not use coil IP before, so I’m excited to try it, which is estimated at 20 28watts, but it seems a little better than 30 private watts. decent taste, as you can expect from a coil mesh, and do not think you will be satisfied with its performance. And a minimum of condensation in the tank as well. HP reel also performed well, although my choice would mesh 0.6ohm coils in this application.

 

 

Pro:

 

18650

60 watts output

Good variety of reels

 

Drawbacks:

 

the movement of the panel

small screen

 

Conclusion:

 

If you are a fan of the arteries of the PAL series before but always hope you have a battery that is a little more then there is much to recommend here with the introduction of version 18650 without much increase in size. Adjusting the panel could be better, but I’m very picky at that time as I found the worst, so if you are in the market for a budget device box ingot type, you could do a lot worse, especially with relx vape current price is $ 21.47,

 

So my friend of the SE arteries well built device, the camera quality is very good and is made of a zinc alloy. I love the design of this device and this device is very nice in hand. With this device, you receive a lanyard that many would like and also with this device, you receive two cartridges with different coils in Nice.

Funnels convenient to use. You can fill the cartridge easily and without any problems with the gorilla of the bottle. the capacity of the cartridge 2 ml is very good capacity for small devices. One can choose between two coils, one coil has a resistance of 1 ohm resistance and other 1.4ohm. This device has a shutter button that can be used and can use the pull switch is activated, which is very good. The battery has a capacity of 700 mAh which is more than good for small devices and also can charge the battery very quickly as the load bearing 1A.

The device of airflow is a little loose, do not pull MTL air flow is tight, loose mtl interesting and I want a better flow of air tight. Good taste, I am satisfied with the taste here, also shot in the throat. Shutter button and draw activated in factory swith both were fine and had no problems here, but I want to use the shutter button for the flow of air mtl cowards. I like the battery indicator because I know how much battery is left. The device operates in output mode that someone will like and do and this device works up to 20 W when the battery is fully charged. I like what they do on top of the machine, because I can see the liquid mail within the cartridge is really good.

Therefore, the design of this device is very good, the build quality is very good and I like almost everything here, so I recommend this unit if you like mtl loose vaping.

 

 

 

Drawbacks:

 

– Drawing tight

 

 

 

Pro:

 

– I love design

– Good build quality

– Easy to use voice

– It is always good in hand

– easy to fill

– 2 ml capacity

– You can see eLiquid

– Two cartridges in the package

– Drawing switch is activated

– fire button

– The battery indicator

– c Usb

– The good taste

– 700mAh

– longe

 

 

Thank you gifts sky

You can be purchased here: relx device

 

Leave a Reply

Your email address will not be published. Required fields are marked *