How to Clean a Coil in Your Vapors
What is a Vaporizer Coil? A Vaporizer Coil is a heating component which acts like the middleman between the vaporizer and your e-juice. A vaporizer device generally contains a glass ampoule, which contain a liquid e-juice, and the heating coil heats up this liquid so that it becomes vapor. The heat generated by the vaporizing coil then causes the liquid to turn into that delightful vapor.
You can find a wide variety of Vapes available on the market today. Most vaporizers use a heating element, but some newer devices use a Vaporizer Coil. They have become increasingly popular in recent years. Some people prefer using a heating element because it offers a more consistent taste. However, if you are looking for an easy way to produce e-juice, a Vaporizer Coil is your best solution.
To clean your Vape coil, you should first remove the paper towel from the base of the unit. On newer models, you may need to remove the rubber bands as well. Once you have removed everything, you should take the paper towel and gently wipe away any built-up grime. If your unit has a screen, you may be able to access the switch and twist it off to clean the screen. If it doesn’t, you may need to get a new coil.
You will need a bottle opener or a screwdriver. Many devices now come with a cleaning tool kit. If you are cleaning your own coils, you should follow the manufacturer’s directions closely. If your warranty has not expired, you should also follow these instructions to ensure your Vaporizer Coil lasts as long as possible.
There are two basic ways to clean your Vape coils other than using the cleaner. If you have purchased one of the newer Vaporizers, they usually come with a cleaning kit. These kits typically contain a small bottle and a wire brush. You can also purchase a cleaner in a grocery store it in your refrigerator. This method is only recommended if you plan on keeping the unit in the same location for the life of the warranty. Leaving worn-out coils in a hot car will shorten the life of your mod.
If you are unable to find a cleaning kit for your Vaporizer Coils, you can remove the wick from your device. If you have unplugged the unit, you can use a small screwdriver to pry off the wick. If you have replaced the screen, removing the screen will loosen the screws that secure the wick to the body. Once the wick is loose, you can pull the unit straight out of your device. Be very careful when doing this process, as using too much force will break the glass.
One way to clean your Coil is to place it in a bowl of water with the lid slightly full. The idea is to gently soak the coil for about five minutes and then re-cap the coil with new silicone. Leaving your Coil in the water without any cap will most likely result in a burnt taste in your Vaping. If you are not sure that you have burnt the taste out of the coil, do not panic. The burn is probably from a previous overheating and will dissipate over time.
The easiest way to clean your coils if you are not sure whether or not they have burned out is to test it out on another piece of cake. By placing a piece of cake onto your mod, you will be able to tell if there is a burnt taste in your Vaping or if the mod may need to be repaired. Another easy way to test if your Vape coil types require cleaning is to submerge the atomizer in cold water. If your coil is still operable after submerging, then it is safe to clean the mod. Cleaning your mod is essential to maintain the quality of your mod and ensure that you get the maximum amount of flavor out of your mods.